QSL card

I've been looking over the QSL cards I received with the view to somehow printing on the back, given my handwriting is worse than any doctor, or spider... Like many my QSL cards have a printed back to add QSO information in predefined boxes. I thought I could probably sort out a template for Apple's Pages word processor to print the rear of a card. Some cards I received simply have a label stuck on the rear positioned top right with all the information on. That seems typical of special event stations or, I guess people that send a lot of cards. Another example, similar to mine has a longer label with details overlaying the pre-printed boxes and having almost the same design as those boxes. I guess that makes it easy to either print a label or fill the card in by hand. Many of the cards I receive are hand written, all with far, far neater handwriting than mine! So I wrangled Pages and got text in approximately the right places as an experiment. I figured out how to define a page size of QSL card dimensions and hit print. As expected the printer was sat waiting for…

I thought I was going mad today. I wanted to print some rails for the FT817 and I already had the sliced files on the SD card in the 3D printer. I selected the first (there are two, one is a mirror of the other) and told it to print. Nothing. Reset the printer and tried again. Nothing. Opening the SD card on the Mac showed the file to be 0 bytes, which is certainly was not as I had printed it before. Ok, copy it again and try again. Nothing! Right. Delete all the files on the SD card - I have them all on the Mac anyway. Copy just the files for the rails across and try again. Nothing! Looking at the SD card via a terminal window - I must admit to be my favourite UI - it was full of all sorts of junk. Going duff perhaps? Ok, use a recycled 8Gb micro-SD in a holder, delete all the files currently on it, copy the rails across and try that. Ah, the files did not delete so it's full of old junk and I can't spot the files to print. Back to the Mac. Tried 3…

I've been meaning to set up something to generate a testcard via composite video for a while and, as is typical of me the ideal solution was sitting there in a BATC magazine on my bookshelf. CQ-TV No 270 has the details of one such setup using a Raspberry Pi Zero. I don't have one of those and Pi systems are hard to come by these days but surprisingly I had a 3B not doing anything. Software downloaded, 4-way jack to RCA plugged in and connected to a TV and, nothing. Well, a buzz. Checked the cable, all ok. Checked what the Pi wants... ...why does the Pi have to have the connections different from what appears to be a standard hi-fi 4-way to RCA lead? Or, rather, why does the hi-fi 4-way lead I have have to have different connections? Grumble. Ok. I wanted to test this seeing I had it all sitting in one of the bedrooms attached to a TV. Stripping down a 4-way jack lead that I never needed and which was far too short to be of use I made a lead. It would last probably half a second in normal use but worked sufficiently…