CaribouLite SDR
I came across this via a post someone made somewhere - actually it might have been an email on a group. Anyway, with a tx/rx range top to 6GHz I thought, why not? It arrived quite quickly from Crowd Supply via Mouser with Crowd Supply charging the VAT but no other taxes on arrival.
I duly mounted it on a spare Raspberry Pi 3B with a fresh Bookworm 64 bit OS and followed the installation instructions at https://github.com/cariboulabs/cariboulite but I always got various errors and never got to a working system. The errors were mainly surrounding the SMI driver and the kernel headers. There seemed no way round this one, and thus no working system.
Following on from another complaint I downloaded and installed DragonOS, a 64 bit variant with lots of SDR utilities built in. Once installed, although the developer stated that ssh is available from first boot and does not need the usual empty ssh file it is not - the system does not open port 22 but does open the vnc port so I then had to find out which of my desktop systems has a vnc viewer as I never use it. When I found one and connected all it gave me was a blank screen. But guess what? Adding an empty ssh file onto the SD card worked, despite the advice!
Following the guidance from one user regarding getting the cariboulite to even install I did a complete upgrade / dist-upgrade cycle and then began the installation process. This time there were no errors about SMI or the kernel headers but there were fatal errors in the general build and no working system at the end.
After countless iterations, reading comments from other users, watching YouTube videos etc. I had to admit defeat and give up.
So there we are. On one hand it serves me right for not finding and reading all the issues before ordering this thing, but on the other given it costs money I rightly expect more, i.e. something that actually works rather than something that will sit in a box until maybe, one day the developer sorts the mess out. As it is I would compare it to the excellent SDRConnect and RSP SDR products which just work - this is the exact opposite!
In a nutshell, don't bother with this card. But then, you never know, maybe the developer will sort the software and I will re-visit this post in a more positive light.
Update: there is a fork of the software detailed at https://github.com/cariboulabs/cariboulite/discussions/82 but following those instructions in a fresh Bookworm throws up the same kernel header errors and results in no SMI driver. So no go there. I tried the same in a fresh DragonOS - I must have been mistaken about the ned for the ssh file because I added this but DragonOS never opens the ssh port for me. So, no go there either!
All in all this has been a lesson in how to waste many hours for no gain. YMMV. There are a few other web pages with differing views and builds which I may try but as a product this is really, really poorly supported by the developer.