10MHz OXCO

M0RVB

I recently acquired a 10Ghz / 144MHz transverter which should get me a little closer to the band. I do still have a kit to build but having this means I can eventually test that as well. It needs a 10MHz reference input and I was recommended one from an eBay seller in China. The unit arrived today and having had it sat on a 'scope and counter for several hours it does seem to produce a solid 10Mhz signal at a nice sine wave (it has TTL output too). Not bad for £12.

You should also read:

M0RVB

A new clock plus 10MHz reference GPSDO

I built a thing! This is a GPSDO using a PCB and kit of parts supplied by G8CUL and a OXCO from G1OGY. It uses a Jupiter GPS module which provides the PPS signal and a 10kHz output and the completed module provides 2x 10MHz and 1x 1MHz outputs. Although there are a number of such designs this one is nice in that it also has a display and shows the current date and time as UTC. This was, I think my third SMD construction and certainly the Mose SMD devices including multi-legged chips. No issues in construction especially given the quality of the PCB that G8CUL had made. The backup battery is a CR2 3.3V type and helps with warm starting. As the regulator gets hot I managed to fit a heatsink between it and the rear of the case and hopefully this will sort out heat transfer, otherwise I may need to bolt another heatsink on the rear. Construction in a die cast box would have been better maybe but the blue/white box fits in with others in the shack, plus I had it already! The bezel is cut down from a 3D printed one from Printables.com designed…

Continue reading...